Spray bark collar, waterproof and rechargeable

.Waterproof and rechargeable design .Total Spray times record

Main Feature:

1. The unit size: 63 x 40 x 34 mm

2. LED power indication

3. Built-in Li-ion rechargeable battery(300 mAH)

4. Rapid charge time within 2 hours for full charge.

5. Water-proof design

6. Low power consumption

7. Record the total spray times automatically when you turn off the collar

8. The device is safety and no negative impact or hurt to your pets.

Operation Instruction:

A: Before use

1. Recharge the collar well before use. (reference to the recharge battery)

2. Open the “ON/OFF” switch to “ON” status (reference the “ON/OFF” switch)

B: How to use

1. Place the spray collar on your dog’s neck close to the ears.

2. The spray collar should fit snugly, yet loose enough to allow one finger to fit under the strap.

3. Make sure the Spray Nozzle is angled out and pointing up towards the dog’s snout. For long haired dogs , It may be necessary to trim the neck hairs along the spray path

4. Ensure the Refill Port is clean . If any dirt or debris enter the refill port , please clean the port before each fill

5. Hold the Spray can upright and firmly press the nozzle down into the Refill Port . Hold for 15 seconds and remove

6. The device will eject spray automatically when detect the dog barking and keep on spray if the dog’s barking is continuous without interval over 5 seconds.

7. The device will return to the original status if it can’t detect the barking for 5 seconds.

8. The device is safety and no negative impact or hurt to your pets.

9. The Red LED will flashes to indicate the total spray times when you turn off the collar . For example , if the total spray times is 3 , the Red LED will flash 3 times once the collar power off .

C: Cautious

Battery Maintenance : When storing the receive collar for long periods , remember to regularly give the battery a full charge .This should be done once every 10 to 12 weeks

Charging

Spray bark collar, waterproof and rechargeable